What is the main purpose of the overhaul ball (headache ball) on a single-part whipline?
- Its weight adds to the crane's rated capacity when on the whipline
- It stops the hook from being drawn into the boom tip
- Its weight keeps the line taut and pulls it down when unloaded
- It measures the load on the line for the operator
Show the answer
C. Its weight keeps the line taut and pulls it down when unloaded
With no load on the hook, the ball's weight overcomes friction and the weight of rope on the drum side so the line pays out and stays seated in the sheaves. Its weight is a deduction from capacity, never an addition.
Reference: Mobile crane components
A solid concrete block is 6 ft long, 4 ft wide and 2 ft high. Concrete weighs 150 lb per cubic foot. What does the block weigh?
Answer in lb.
Show the answer
7200 lb
Volume = 6 × 4 × 2 = 48 ft³. Weight = 48 × 150 = 7,200 lb.
Reference: Load weight calculation: volume x unit weight
Under OSHA's Table A, what is the minimum clearance from a power line energised at up to 50 kV?
- 10 feet
- 4 feet
- 15 feet
- 20 feet
Show the answer
A. 10 feet
Table A sets 10 feet for lines up to 50 kV, rising in steps for higher voltages. Twenty feet is the distance that triggers the power line precautions when the voltage has not been established, and 15 feet is the Table A value for over 50 kV up to 200 kV.
Reference: 29 CFR 1926.1408, Table A